The smallest DCC command station on the market ! Small in form, but great in features and performance. It presents: Unique DCC signal generator: – With priority control and interleaved packet generation. – Changes sent  by any int Read More

The IO interface-extension for the small DCC command station, It extends the YD7100`s already impressive features and capabilities by even more interfaces and options. It presents: Integrated RailCom Global detector, enables a.o. decoder r Read More

The power-house of the YD7x family, It presents: Universal 3.5 Amp booster. Fully galvanically isolated on all, defacto industry standard inputs: – LocoNet – B – Roco B-BUS – DCC-CDE – Track Sniffer Automatic input selection LED Read More

The ultimate combo for your layout ! YD7100 Command Station + YD7101 Interface Extension, together presenting unparalleled features. And… also not unimportant, it saves some buck compared to separate purchase.

Specially designed to cope with, high-current, solenoid point-motors, the YD8044 is our 4-fold solenoid decoder with CDU and Frog Supply. It presents the following features: Four independent 9.5Amp solenoid outputs Smart, 9400 uF CDU, Read More

The YaMoRC solution for switching and signaling: our 16-fold signal/switching decoder. It presents the following features: Sixteen independent 2.5Amp MOSFET outputs Max 5 Amp combined current Very simple basic-setup (base address), by pres Read More

Specially designed to cope with, high-current, solenoid point-motors, the YD8008 is our 8-fold solenoid decoder with intelligent CDU. It presents the following features: Eight independent 9.5Amp solenoid outputs Smart, 9400 uF CDU, monitor Read More

The RailCom enabled feedback module. It presents: 16 independant local RailCom detectors 1 general purpose global detector on Track-Output For non-RailCom equiped locos or cars, the module also provides Current Sensing on each input. 3mA c Read More

Our standard current-sensing feedback module with LocoNet Interface It presents: 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common 2 Amp continuous current per detector, 8 Amps in total combi Read More

Our classic s88N feedback module with current sensing inputs It presents: 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common 2 Amp continuous current per detector, 8 Amps in total combined ove Read More

Our standard opto-input feedback module with LocoNet Interface

Our classic s88N feedback module with opto isolated AC-inputs.

Our standard ground-input feedback module with LocoNet Interface with: 16 inputs, switching against Ground ( both "C" terminals ) Capacitive input filter on every input, to suppress noise on long cables Configurable on- and off-d Read More

Our classic s88N feedback module with ground sensitive inputs with: Capacitive input filter on every input, to suppress noise on long cables Configurable on- and off-delay setting for each input for optimal de-bouncing of pushbuttons, swit Read More

Our standard current-sensing feedback module with RBus / XBus Interface It presents: 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common 2 Amp continuous current per detector, 8 Amps in total c Read More

Let your Fleischmann, Roco, Märklin, Arnold or DIY turntable being operated fully digitally Our specialized TurnTable Controller. It presents: Full Motor control, with acceleration and braking. LocoNet, for feedback in- and output and tur Read More

Let your Preiser, Noch or Faller people cross your railroad safely Our specialized Railroad-Crossing Controller. It presents: 4 Servo outputs, for up to two separate- , or double-track boom-barriers 2 Blinker opposite phase outputs 1 Bell Read More

The position-sensor module for our TurnTable Controller

The ultimate LocoNet Gateway module. It presents : WiFi/WLAN accesspoint for standalone operation without the need for an external router LAN 100baseT Ethernet port to integrate the gateway in your home network Infra Red RC5 Receiver USB i Read More

Our multi-functional LocoNet device. It presents : Repeater functionality from one opto isolated Protected LocoNet to two, independant Standard LocoNets RailSync pass-through when connected to a LocoNet-B commandstation on the Protected Lo Read More

The Configurator Module for all our modules with either ES-PGM-LINK or ES-OUT-LINK interface. It presents : WiFi/WLAN access-point from our YD9401 module for standalone operation without the need for an external router LAN 100baseT Etherne Read More

The small Configurator Stick for all our modules with ES-PGM-LINK or ES-OUT-LINK interface. It presents : USB interface over virtual COM port with YD-Command for the classic, PC-based configuration software. ES-IN-LINK for direct-connectio Read More

A set of adapters that creates the ES/IO – LINK between modules over CAT 5 Patchcable

The actual adapter that creates the ES/IO – LINK between modules

A set of 2 adapters to connect turnout-motors that require polarity change to operate. More commonly named as motor- or stall-drives. Suitable for a.o. motor drives operated on our YD8116: Conrad Hoffmann Tillig Fulgurex Tortoise Cobalt An Read More

A set of 2 adapters to connect so called Common-Cathode ( minus-return ) signals to our YD8116. The adapter comes with an onboard 270 Ohms series-resistor. Thus effectively limiting the output current to about 50-70 mA depending on the supp Read More

The WiFi / LAN aftermarket upgrade to replace a Digikeijs DR5000`s RM04 outdated Wifi/LAN module. It presents : WiFi/WLAN accesspoint for standalone operation without the need for an external router LAN 100baseT Ethernet port to integ Read More