FAQs

General

While thinking about creating a new model railroad brand, somebody said: Oh no…. yet another company that produces model railroad stuff…

That was the base for our
YaMoRC® brand name: Yet another Model Railroad Company.

After that a long process started to check the uniqueness of the brand name, whether it did not mean something indecent in any major language and not the least important whether the Internet Domain yamorc with all it’s extensions was still free.

In the end we concluded, that there is only one other organization in the whole world that uses the same acronym: The Yamaha Owners and Riders Club since this is a completely different branch of interest and this Club utilizes a different Internet Domain, we decided to take chance and the new brand name was born !

Category: General
Tag: Public

Well, a safe answer is: It Depends…

Although our founder and CEO, mr. Karst Drenth, designed and developed all the black DR4xxx and DR5xxx modules sold by Digikeijs, none of them can be supported in respect to the hardware and/or firmware/software. Digikeijs themselves are fully responsible for maintenance, support and repairs.

So we don’t provide any free-of-charge support/advice/troubleshooting for the black Digikeijs modules.

Category: General
Tag: Public

Well here is the story of our founder and CEO!

Karst started his model railroad career when he was 6 years old. Santa brought him his first Fleischmann train set. Years went by building layouts, “inventing” electrical solutions and playing intensely with his trains.

This interest for electricity and electronics brought him to Technical University, from which he graduated in 1984. Until 2003 the activity in model railroading was rather dormant. But then he bought his first Digital System, a Daisy I from Uhlenbrock. Converting locos to DCC and playing with that is nice, but the LocoNet present on that system was more interesting. Since, back then, only very expensive devices for linking train stuff to PCs existed, it was time for Karst to build something himself. John Jaber’s LocoBuffer was the piece of kit of choice.
This announced a new era in Karst’s model railroad career. After studying the LocoNet and DCC protocols, Karst started to design is own hardware. Interfaces ( LocoNet-PC-, XpressNet-Feedback-PC), Feedback modules, Servo decoders, Switch decoders etc.

Of course these activities did not pass unnoticed by fellow model railroaders. Many of them also wanted the devices Karst designed and produced in small scale. At the heydays, over 500 kits of the famous “ServoSwitch” were sold under Karst’s hobby-company KDesign Electronics.
Again that did not stay unnoticed either, but this time commercial interest arose. A company called Digirails showed interest in Karst’s designs and wanted to produce them in license. That initiative materialized and an almost 10 year long cooperation started between Karst and Digirails (later Digikeijs). Karst kept on designing: DR4088 series, DR4018, DR4024, DR5000, DR5033, DR5088RC, DR5013, DR5052 etc. etc.
In the same time period Karst also shared his vast knowledge as a designer and advisor for major model railroad companies.

In late 2019 the cooperation with Digikeijs came to an end. Both parties decided to go their own way, where Digikeijs bought the production and marketing rights for the “DR-portfolio”.
Mid 2020, Karst started designing a completely new portfolio under the wings of the Drenth Design & Consulting B.V. company, with the brand YaMoRC. Until 01-01-2022 Karst has been employed for 30 years as an Enterprise Architect in a major Dutch software company. As of then however Karst decided to devote the remaining years of his career to 100% model railroad. Be it (digital)electronics, models, scenery or what more can be thought of.

From now on, you just have to follow this site to stay informed about Karst’s activities !

Category: General

Experience, over the past 10 years, with manufacturing electronics in the Far East showed that quality control is cumbersome. Even though contracts and agreements with Far East PCB assemblers are common practice, production quality fluctuates usually between 5 and 15% of DOA ( Dead On Arrival ) PCBs. Or, have “hidden” defects like bad soldering, which only show up when the modules are already mounted in/at/under your layout.

To overcome these bad-quality problems, YaMoRC has chosen to let it’s products being manufactured in Germany. YaMoRC has established a unique cooperation with one of the major German model railroad electronics companies. Being within an acceptable traveling distance, it enables YaMoRC to guide the production on-site to ensure flawless production. All products are subject to a test-run-assembly in presence of YaMoRC and verified and appraised on-site. It is that only after this verification process, the series-production continues. Needless to say, that the aforementioned company uses state of the art machinery for SMD and conventional components, as well as high quality, lead-free soldering. Also electronic components are sourced directly from reliable, well known suppliers/resellers in EU and/or USA.

Once the PCBs have been assembled and visually inspected, they are shipped to YaMoRC’s assembly- and test-facility in Apeldoorn, The Netherlands. There is where every (!!) PCB undergoes a comprehensive, fully automated test. Only after successful completion, the PCBs are assembled into their enclosure and are labeled with their respective sticker. Stays only the packaging into eco-friendly, natural, plastic-free, cardboard boxes.

So we proudly carry the quality label: “Made in Germany”, because Quality is Essential!

Category: General

The manuals and firmware + configuration software can be found under the SERVICE tab in the product details of the respective product.
Note: The firmware and config software is identical for all modules. You just need to download and install it once for all modules 🙂

Example: Click here and then the SERVICE tab.

Category: General

The printed press shows it’s interest in YaMoRC and wrote some nice articles:

Category: General

Technology

ES-Link is an open development of YaMoRC on the s88 bus. From that also emerges the name Extended S88 bus.

Physically It enables two adjacent YaMoRC modules to be interconnected by means of the ES-Link bridge: This comes in handy at the moment one e.g. wants to create a 32, 48 or larger input LocoNet feedback module by combining YD6016LN with multiple YD6016ES feedback modules.

Usually so called s88 Master modules come with one ES-Link connector: ES-IN-Link. This connector is usually present on most YaMoRC modules with a USB connection. In that case, the ES-IN-Link also provides bi-directional serial communication based on a UART protocol at 9600 Baud. This enables modules which do not have a USB connection, still to be configured and updated when connected to a module with ES-IN-Link.
Such USB-less modules can have either ES-PGM-Link or ES-OUT-Link connectors. Both are Identical and must be connected to an ES-IN-Link module.
Finally a module can have ES-IN-Link and as well ES-OUT-Link. Such modules can be daisy-chained and provide so called transparent- or pass-through-mode.

When not used in configuration mode, the ES-IN-Link presents a standard s88 connection to s88 Feedback units.

Examples:


A 32-input LocoNet feedback module, created by combining YD6016ES and YD6016LN and the ES-Link stick.


A YD8044 Decoder connected to a YD6016LN for configuration and update purposes.

Modules on the ES-Link bus
Category: Technology

Feedback modules often are referred to after the method of how their sensors work.

YaMoRC offers 4 types of feedback inout sensors:

  • Current Sense: Inputs that measure the current that flows from rail to rail caused by e.g. a loco’s motor, headlamps etc. Also passenger cars with interior illumination or freight wagons with conductive wheel axles.
    Usage: Track (section, block, turnout) occupation detection.
  • OPTO: Inputs that are galvanically isolated from the module electronics by means of an optocoupler. Having this isolation, enables two different power sources to be used for module and e.g. tracks.
  • GND: This is the most simple input type. It detects feedback when the input is connected to ground (GND). The module provides a so called pull-up resistor to turn the feedback off in case the input is left “open”. An important note to this type of input is, that for detecting track events, it cannot be used with boosters that uses so-called H-Bridges!
  • RailCom: This type of input is able to detect messages coming from the loco sent by a RailCom enabled decoder. The module translates those messages in feedback messages to the command station. It is mainly used to detect which loco (address) is present in a stretch of track. For vehicles without a RailCom enabled decoder, this type also works as a Current Sense input.

Category: Technology

Our YD8116 can be controlled either via “normal” DCC turnout addresses or via the relatively new DCCext format.

Briefly summarized, the difference:

With multi-aspect signals, switching via “normal” DCC addresses can become complicated. Different DCC switching commands must be combined in a certain time and sequence. This, of course, also consumes several DCC addresses.

If the DCCext format is used, only one DCC address is needed to control the different signal aspects for multi-aspect signals.
control. To the DCC address simply a value from 0 to 255 is sent. A specific signal aspect can be individually assigned to each value.

What is the advantage of DCCext?

  • No complicated DCC address combinations have to be switched!
  • The use of DCCext saves normal turnout addresses!
  • Thus, as an example, for a DB H/V exit signal with four aspects, only one single turnout address is required, whereas conventionally two or more DCC addresses are required.
  • Up to 255 switching aspects can be freely assigned.

For more detailed information, please refer to the RCN-213 standard. Please note that the command station you are using must support the DCCext format.

Categories: Technology, YD8116

Comparing the DR5000 to an YD7001, one sees the following benefits:

  • Mixed protocol environment possible, e.g. WLANmaus and HandyApp via Z21 and Traincontroller via Xpressnet, WDP or iTrain via LocoNet LAN.
  • Use of LAN for Tool and MRR Software, as many have problems with USB.
  • More WLAN clients than before.
  • Feedback is no longer eaten away when using app and control software at the same time.
  • USB stabilised with e.g. iTrain, WDP etc.
  • New control panel that can be freely configured.
  • DCCext signal control
  • Loco functions up to 64
  • Pom accessory decoder with corresponding hardware
  • Distinction between emergency off and emergency stop without track voltage off.
  • Indication of which connection to the YD7001 is currently active by green colouring of the corresponding COM port or the IP
  • ES-Link functionality
  • Improved feedback monitor both visually and technically (for example, the bell function)
  • Guaranteed software maintenance
  • Genuine technical support
Categories: Technology, YD9401

Load More