YD6016LN-CS
€87.50
Our standard current-sensing feedback module with LocoNet Interface
It presents:
- 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common
- 2 Amp continuous current per detector, 8 Amps in total combined over the 16 detectors on the whole module
- 5 Amp short duration overload (100ms) capable per detector.
- 1-1.5mA current sensitivity
- Capacitive input filter on every input, to suppress noise on long cables and track-sections
- Configurable on- and off-delay setting for each input for optimal de-bouncing in case of non optimal wheel-track contact
- Every input individually configurable for various actions like feedback, turnout toggle, turnout throw, turnout close
- Every input individually configurable for feedback- or turnout-address
- ES-IN-Link for direct connection of up to 5 additional YD6016ES modules (effectively creating a 96 input LocoNet module)
- ES-IN-Link connection to other ES-Link enabled modules for module-configuration
- ES-IN-Link connection to YD9101 for web-based configuration
- USB connection with one Virtual COM ports for the YD.Command** protocol
- Firmware updatable over USB
- Power supply directly from LocoNet-T or -B ( or USB for easy configuration and updating on a PC )
**)
Disclaimer: YD.Command is the internal YaMoRC communication protocol. It is not publicly open, nor does YaMoRC supply support 3rd parties to use it. Futher can it be subject to change on demand and at will of YaMoRC, without further notice or explanation.
Soft- and Firmware:
http://www.yamorc.de/downloads/YD_Config-build-71.exe
Anleitung DE:
http://www.yamorc.de/downloads/YD6016LN-CS.de.pdf
Handleiding NL:
http://www.yamorc.de/downloads/YD6016LN-CS.nl.pdf
Configuration Demo:
http://www.yamorc.com/text/html/YD6016LN.html
Konfigurations-Hilfe DE:
http://www.yamorc.de/downloads/YD6016xx.Konfig.de.pdf