Control Modules
€149.95
€82.95
€67.50 Q4
€34.95
€94.95
Control Modules
€149.95
Let your Fleischmann, Roco, Märklin or DIY turntable being operated fully digitally
Our specialized TurnTable Controller.
It presents:
- Full, regulated, Motor-Control, with acceleration and dynamic braking.
- Supports DCC and Motorola turnout commands
- Supports DCCext "aspect" driven commands.
- LocoNet, for feedback in- and output and turnout-command input
- Control protocols: Fleischmann (TurnControl) & Märklin (7686)
- Built-in DCC generator for "Profi" variant ( Decoder in bridge )
- RailCom detector for the bridge
- Occupance sensor for the bridge
- Automatic, configurable polarity switching per entry
- Three-button manual controls
- ES-LINK-IN for extra position-sensor modules and the YD7652EX, extender for Märklin and Roco Turntables
It currently supports:
- Fleischmann H0 6052 (Brass track)
- Fleischmann H0 6152 (Profi track) = Roco 6152
- Fleischmann H0 6651 (New-Silver track)
- Fleischmann H0 6652 (3-rail & 2-rail) = Roco 665201
- Fleischmann H0 6154 (Profi track, small bridge) = Roco 6154
- Fleischmann N 9152
- Roco H0 42615
- Roco TT 35900
- Märklin H0 7286
Power:
- Input 10-19 V DC 2Amp
Recommended Upgrade:
Modes, modules and turntables:
| Turntable(s) | Mode | Module(s) |
|---|---|---|
Turntable remains unmodified | Basic | YD7652 |
| 6052, 6152, 6651, 6652 (2-rail), 6154, 9152, 35900 | These turntables make a clicking sound while turning in Basic mode, due to the way the positions are counted. | These turntables can be connected directly to the YD7652, no further modules needed. |
| Turntable remains unmodified | Basic | YD7652 + YD7652EX |
| Märklin H0 7286 | These turntables make a clicking sound while turning in Basic mode, due to the way the positions are counted. | These turntables can be connected directly to the YD7652EX. The YD7652EX is connected to the YD7652 with the TURN-Link and ES-Link adapter boards. |
Turntable remains unmodified | Basic | YD7652 + YD7652EX |
6652/Roco 665201 (3-rail) | These turntables make a clicking sound while turning in Basic mode, due to the way the positions are counted. | These turntables can be connected to the YD7652EX with the 6652 adapter installed. The YD7652EX is connected to the YD7652 with the TURN-Link and ES-Link adapter boards. |
Turntable remains unmodified, must be set in "1" mode | Basic | YD7652 + YD7652EX |
| Roco H0 42615 | These turntables make a clicking sound while passing an exit, due to the mechanical sensor on the bridge-end. | These turntables can be connected to the YD7652EX with the Roco-Edge adapter installed. The YD7652EX is connected to the YD7652 with the TURN-Link and ES-Link adapter boards. |
Turntable remains unmodified | Basic-Plus | YD7652 + YD7652ES |
| 6052, 6152, 6651, 6652 (2-rail), 6154, 9152, 35900 | These turntables can be controlled in such a way, that the position of the bridge is sensed. And can thus turn without the need for counting the positions and in that way turn without clicking sound. | These turntables can be connected directly to the YD7652. For the position sensing, one or more YD7652ES are needed. |
Turntable bridge needs installation of a DCC Loco-Decoder | Profi-Plus | YD7652 + YD7652ES |
| 6052, 6152, 6651, 6652 (2-rail), 6154, 9152, 35900 | The Profi mode relies on the fact that the bridge motor is controlled by a loco-decoder, the bridge latch by a function output of that decoder. The YD7652 will then output a DCC signal on it's motor connections. Multiple decoders can be built into the bridge. | These turntables can be connected directly to the YD7652. For the position sensing, one or more YD7652ES are needed. |
€82.95
The position-sensor module for our TurnTable Controller
This module can handle a maximum of 12 turntable-exits.
If more are present on your turntable, just connect another YD7652ES.
€67.50 Q4
The companion for the YD7652 to connect stepper-motor driven turntables.
It presents:
- TCM2209 Silent Stepper-Driver.
- Processor controlled driver-settings
- Micro-Stepping from 8 to 256
- Supply 12 - 19V
- Max current 1.2A
- Integrated connector for Home/Index sensor. ( Hall, IR, etc. )
- Passthrough of bridge track-supply (with auto polarization) from YD7652.
- Dynamic acceleration and braking.
€34.95
The companion for the YD7652 to connect Roco and Märklin turntables.
It presents:
- Connectivity for Märklin (old) and Roco H0 turntables.
- Includes: RocoEdge-adapter, TURN-Link bridge, ES-Link bridge
- Turntable-Type setable by jumper.
- Provides ES-Link pass-through,
- as well as an 8 Bit sensor module for signals from Roco- and Märklin turntables
Note: This module is also needed if you want to connect and use the Fleischmann/Roco 6652 / 665201 turntable. For that we also have a connector available on demand, please ask your dealer.
€94.95
The YaMoRC solution for practically all polarity reversing tasks.
It presents the following features:
- 2-sensor short-circuit free operation.
- alternative short-circuit detection mode
- follow polarity with external (LocoNet) occupation feedback
- follow polarity with turnout at entry
- via LocoNet
- via DCC
- set turnout at exit
- 100% solid-state, no relays
- RailCom Block-, Address and Rail-Direction Report
- LocoNet occupation of S1, Track and S2 feedback, as well as short circuit status and track-polarity
- ES-Link occupation of S1, Track and S2 feedback, as well as short circuit status and track-polarity
- ES-Link configuration
- Firmware updatable
- Current Ratings:
- 2A - Continuous Operation
- 2.5-2.75A Short Circuit Detection treshold. For reversing as well as short circuit shurdown.
- 3.5A - Maximum Current during maximum 5 Seconds ( Command Station/Booster should switch off in this time )
Control Modules
Let your Fleischmann, Roco, Märklin or DIY turntable being operated fully digitallyOur specialized TurnTable Controller.
It presents:
Full, regulated, Motor-Control, with acceleration and dynamic braking.
Supports DCC and Motorola turnout
Read More
€149.95
The position-sensor module for our TurnTable Controller
This module can handle a maximum of 12 turntable-exits.
If more are present on your turntable, just connect another YD7652ES.
€82.95
The companion for the YD7652 to connect stepper-motor driven turntables.
It presents:
TCM2209 Silent Stepper-Driver.
Processor controlled driver-settings
Micro-Stepping from 8 to 256
Supply 12 - 19V
Max current 1.2A
Integrated connect
Read More
€67.50 Q4
The companion for the YD7652 to connect Roco and Märklin turntables.
It presents:
Connectivity for Märklin (old) and Roco H0 turntables.
Includes: RocoEdge-adapter, TURN-Link bridge, ES-Link bridge
Turntable-Type setable by jumper.
Read More
€34.95