Name: YD7652
Price: 149.95 Q2

YD7652

€149.95 Q2

Good news ! We have set ourselves a deadline, by announcing the launch at Dortmund's Intermodellbau in April 2026.

Let your Fleischmann, Roco, Märklin or DIY turntable being operated fully digitally
Our specialized TurnTable Controller.

It presents:

Full, regulated, Motor-Control, with acceleration and dynamic braking.
Supports DCC and Motorola turnout commands
Supports DCCext "aspect" driven commands.
LocoNet, for feedback in- and output and turnout-command input
Control protocols: Fleischmann (TurnControl) & Märklin (7686)
Built-in DCC generator for "Profi" variant ( Decoder in bridge )
RailCom detector for the bridge
Occupance sensor for the bridge
Automatic, configurable polarity switching per entry
Three-button manual controls
ES-LINK-IN for extra position-sensor modules and the YD7652EX, extender for Märklin and Roco Turntables

It currently supports:

Fleischmann H0 6052 (Brass track)
Fleischmann H0 6152 (Profi track) = Roco 6152
Fleischmann H0 6651 (New-Silver track)
Fleischmann H0 6652 (3-rail & 2-rail) = Roco 665201
Fleischmann H0 6154 (Profi track, small bridge) = Roco 6154
Fleischmann N 9152
Roco H0 42615
Roco TT 35900
Märklin H0 7286

Power:

Input 10-19 V DC 2Amp

Modes, modules and turntables:

Turntable(s)	Mode	Module(s)
Turntable remains unmodified	Basic	YD7652
6052, 6152, 6651, 6652 (2-rail), 6154, 9152, 35900	These turntables make a clicking sound while turning in Basic mode, due to the way the positions are counted.	These turntables can be connected directly to the YD7652, no further modules needed.
Turntable remains unmodified	Basic	YD7652 + YD7652EX
Märklin H0 7286	These turntables make a clicking sound while turning in Basic mode, due to the way the positions are counted.	These turntables can be connected directly to the YD7652EX. The YD7652EX is connected to the YD7652 with the TURN-Link and ES-Link adapter boards.
Turntable remains unmodified	Basic	YD7652 + YD7652EX
6652/Roco 665201 (3-rail)	These turntables make a clicking sound while turning in Basic mode, due to the way the positions are counted.	These turntables can be connected to the YD7652EX with the 6652 adapter installed. The YD7652EX is connected to the YD7652 with the TURN-Link and ES-Link adapter boards.
Turntable remains unmodified, must be set in "1" mode	Basic	YD7652 + YD7652EX
Roco H0 42615	These turntables make a clicking sound while passing an exit, due to the mechanical sensor on the bridge-end.	These turntables can be connected to the YD7652EX with the Roco-Edge adapter installed. The YD7652EX is connected to the YD7652 with the TURN-Link and ES-Link adapter boards.
Turntable remains unmodified	Basic-Plus	YD7652 + YD7652ES
6052, 6152, 6651, 6652 (2-rail), 6154, 9152, 35900	These turntables can be controlled in such a way, that the position of the bridge is sensed. And can thus turn without the need for counting the positions and in that way turn without clicking sound.	These turntables can be connected directly to the YD7652. For the position sensing, one or more YD7652ES are needed.
Turntable bridge needs installation of a DCC Loco-Decoder	Profi-Plus	YD7652 + YD7652ES
6052, 6152, 6651, 6652 (2-rail), 6154, 9152, 35900	The Profi mode relies on the fact that the bridge motor is controlled by a loco-decoder, the bridge latch by a function output of that decoder. The YD7652 will then output a DCC signal on it's motor connections. Multiple decoders can be built into the bridge.	These turntables can be connected directly to the YD7652. For the position sensing, one or more YD7652ES are needed.