• Universal 3.5 Amp booster.
• Fully galvanically isolated on all, defacto industry standard inputs: – LocoNet – B – Roco B-BUS – DCC-CDE – Track Sniffer
• Automatic input selection
• LED indication of currently active input
• Local GO / STOP button to start/stop the booster, or reset in case of local short circuit
• Follows input RailCom Cut-Out to it's output
• ES-PGM-LINK for easy configuration

• Input 15-19 V DC
• Output 3.5 A peak current, 2.75 A continuous.
• Short circuit protected
• Automatic short-report over LocoNet, CDE channel or BBus interface.
• H-Bridge Temperature measurement
• Track-Current measurement
• Input- and Track Voltage measurement

18V 3.3 Amp Switch mode powersupply.

- Double Isolated
- "Schutzklasse 2"
- Short circuit protected/shutdown
- Overload protected/shutdown
- "Cool" technology, does not heat-up when command station/booster is idle
- Small form-factor
- Real two-conductor low-voltage cord, no thin coax cable
- Made to our own specification, to match our boosters and command stations
- 18 V version

15V 4 Amp Switch mode powersupply.

- Double Isolated
- "Schutzklasse 2"
- Short circuit protected/shutdown
- Overload protected/shutdown
- "Cool" technology, does not heat-up when command station/booster is idle
- Small form-factor
- Real two-conductor low-voltage cord, no thin coax cable
- Made to our own specification, to match our boosters and command stations
- 15 V version, suited for TT scale and smaller

The YaMoRC solution for practically all polarity reversing tasks.

It presents the following features:

• 2-sensor short-circuit free operation.
• alternative short-circuit detection mode
• follow polarity with external (LocoNet) occupation feedback
• follow polarity with turnout at entry
  • via LocoNet
  • via DCC
• set turnout at exit
• 100% solid-state, no relays
• RailCom Block-, Address and Rail-Direction Report
• LocoNet occupation of S1, Track and S2 feedback, as well as short circuit status and track-polarity
• ES-Link occupation of S1, Track and S2 feedback, as well as short circuit status and track-polarity
• ES-Link configuration
• Firmware updatable
• Current Ratings:
  • 2A - Continuous Operation
  • 2.5-2.75A Short Circuit Detection treshold. For reversing as well as short circuit shurdown.
  • 3.5A - Maximum Current during maximum 5 Seconds ( Command Station/Booster should switch off in this time )