Building on the immense succes of our YD9401 upgrade for the DR5000, we decided to bring a complete Command Station, the YD7010, that includes the proven YD7001 technology and YD9401 Network Module. The command station is based on the te Read More

The YD7001-E ( Revision E ) is an intermediate solution to the delay of the YD7100+7101 Set. Availability is very limited, please contact your dealer for details. The command station is based upon a factory new DR5000 mainboard, which has Read More

Delay reason: The chips used for the DC-DC converters have been declared EOL. That means, the factory did not restart production after the chip-crisis. For us this means a redesign of the PCB and Software. Please contact your dealer for alt Read More

The power-house of the YD7x family, It presents: Universal 3.5 Amp booster. Fully galvanically isolated on all, defacto industry standard inputs: – LocoNet – B – Roco B-BUS – DCC-CDE – Track Sniffer Automatic input selection LED Read More

18V 3.3 Amp Switch mode powersupply. - Double Isolated - "Schutzklasse 2"- Short circuit protected/shutdown- Overload protected/shutdown- "Cool" technology, does not heat-up when command station/booster is idle- Small Read More

15V 4 Amp Switch mode powersupply. - Double Isolated - "Schutzklasse 2"- Short circuit protected/shutdown- Overload protected/shutdown- "Cool" technology, does not heat-up when command station/booster is idle- Small fo Read More

The YaMoRC solution for operating RC-Servos. It presents the following features: 4 Servo connections in standard configuration, each servo has: Analog input for position and/or configuration 4 Digital Inputs for analog/conventional c Read More

The YaMoRC solution for switching and signaling: our 16-fold signal/switching decoder. It presents the following features: Sixteen independent 2.5Amp MOSFET outputs Max 5 Amp combined current Very simple basic-setup (base address), by pres Read More

Specially designed to cope with, high-current, solenoid point-motors, the YD8008 is our 8-fold solenoid decoder with intelligent CDU. It presents the following features: Eight independent 9.5Amp solenoid outputs Smart, 9400 uF CDU, monitor Read More

Specially designed to cope with, high-current, solenoid point-motors, the YD8044 is our 4-fold solenoid decoder with CDU and Frog Supply. It presents the following features: Four independent 9.5Amp solenoid outputs Smart, 9400 uF CDU, Read More

Good news ! The YD6016LN-RC has been produced😊, it is available now! The RailCom enabled feedback module. It presents: 16 independant local RailCom detectors 1 general purpose global detector on Track-Output For non-RailCom equiped loco Read More

Our standard current-sensing feedback module with RBus / XBus Interface It presents: 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common 2 Amp continuous current per detector, 8 Amps in total c Read More

Our standard ground-input feedback module with LocoNet Interface with: 16 inputs, switching against Ground ( both "C" terminals ) Capacitive input filter on every input, to suppress noise on long cables Configurable on- and off-d Read More

Our standard current-sensing feedback module with LocoNet Interface It presents: 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common 2 Amp continuous current per detector, 8 Amps in total combi Read More

Our classic s88N feedback module with current sensing inputs It presents: 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common 2 Amp continuous current per detector, 8 Amps in total combined ove Read More

Our classic s88N feedback module with ground sensitive inputs with: Capacitive input filter on every input, to suppress noise on long cables Configurable on- and off-delay setting for each input for optimal de-bouncing of pushbuttons, swit Read More

The position-sensor module for our TurnTable Controller

The YaMoRC solution for practically all polarity reversing tasks. It presents the following features: 2-sensor short-circuit free operation. alternative short-circuit detection mode follow polarity with external (LocoNet) occupation f Read More

Delay reason: The chips used for the DC-DC converters have been declared EOL. That means, the factory did not restart production after the chip-crisis. For us this means a redesign of the PCB and Software. Please contact your dealer for alt Read More

A set of 2 adapters to connect so called Common-Cathode ( minus-return ) signals to our YD8116. The adapter comes with an onboard 270 Ohms series-resistor. Thus effectively limiting the output current to about 50-70 mA depending on the supp Read More

Relay Extension-Adapter for YD8248 4 independent relays for conventional frog-polarization. 2x2 combined relays for power-less frog while moving the servo. 4 independent relays for diverse switching tasks. a combination of the above. Read More

Servo Extension-Adapter for YD8248 4 extra Servo Outputs

The small Configurator Stick for all our modules with ES-PGM-LINK or ES-OUT-LINK interface. It presents : USB interface over virtual COM port with YD-Command for the classic, PC-based configuration software. ES-IN-LINK for direct-connectio Read More

Stepper Motor Extension-Adapter for YD8248 One Stepper-Motor Interface Accepts industry standard Stepper-Drivers e.g. A4988 Driver Note ! Driver not included !

A set of 2 adapters to connect turnout-motors that require polarity change to operate. More commonly named as motor- or stall-drives. Suitable for a.o. motor drives operated on our YD8116: Conrad Hoffmann Tillig Fulgurex Tortoise Cobalt An Read More

The actual adapter that creates the ES/IO – LINK between modules

A set of adapters that creates the ES/IO – LINK between modules over CAT 5 Patchcable

The WiFi / LAN aftermarket upgrade to replace a Digikeijs DR5000`s RM04 outdated Wifi/LAN module. It presents : WiFi/WLAN accesspoint for standalone operation without the need for an external router LAN 100baseT Ethernet port to integ Read More